Automatic Dosing Mixture Equipment Device System - Phosphate
Chemical pump,Dosing Pump,High pressure pump,Dosing Equipment > products > Automatic Dosing Device > Automatic Dosing Phosphate Mixture Equipment Device System > Views

Automatic Dosing Phosphate Mixture Equipment Device System

Automatic Dosing Phosphate Mixture Equipment Device System

Automatic Dosing Phosphate Mixture Equipment Device System main component

 1, Dosing system 2, Mixture system 3, Control system 4, Filter system 5, Alarm system 6, Safety system 7, Pipeline system

Special Performance

♦ Full-featured, safe, stable performance.
♦ Set-mounted for easy transportation, installation and maintenance.
♦ Using stainless steel and UPVC corrosion materials for long service life.
♦ Independent control cabinet for manual control, automatic control and remote control.

Control and Selecting Types
♦ About Control:

BHJY series dosing equipment systems can be controlled by independent control cabinets. Electric appliance parts in electric cabinets are high quality import or domestice products for good performance.
   ♦ Control methods have following choices:
          ♦ Manual Control: this type of control method has stable performance and low cost advantages. All electric appliance parts are started and stopped by hand operation.
          ♦ Semiatuomatic Control: Aequipment can be started when receiving signals of flow level, fault and program, all electrical parts will chain, alarm and stop.
          ♦ Automatic Control: automatic operation function; PID controls the whole procedure from dispensing to dosing to checking to feedback and correcting.
♦ Remote Control: BHJY series Automatic Dosing Phosphate Mixture Equipment Device System is equipped with remote monitoring and control functions( need to specify when ordering). The status of metering pumps, mixers, valves and other electromagnetic equipments can be sent by hard-wiring to the control room. A dosing equipment system that is equipped with a PLC can connect enterprise ethernet to share information withfield instruments, upper monitors, touch panels, IPC, PC and inverters.

Automatic Dosing Phosphate Mixture Equipment Device System Parameter
Model Capacity
(m3)
Flow rate
(L/h)
Discharge pressure
(MPa)
Motor Power
(KW)
Diameter
(mm)
Size
 
L×B×H(mm)
BHJY-1×0.25-16/1.0-1
0.25 16 1.0 0.55 DN15 1500×700×1300
BHJY-1×0.5-32/2.4-1
0.5 32 2.4 0.55 DN20 1600×1000×1500
BHJY-1×1-48/1.0-1
1 48 1.0 0.55 DN15 2000×1200×2000
BHJY-1×1.5-125/0.8-1
1.5 125 0.8 0.55 DN25 2200×1600×2100
BHJY-1×2-310/2.0-1
2 310 2.0 1.1 DN25 2200×1600×2200
BHJY-1×0.25-22/10-1
0.25 22 1.0 1.5 DN15 1500×700×1300
BHJY-1×0.5-38/6.4-1
0.5 38 6.4 1.5 DN20 1600×1000×1500
BHJY-1×1-62/4.0-1
1.0 62 4.0 1.5 DN25 2000×1200×2000
BHJY-1×1.5-78/1.0-1
1.5 78 1.0 1.5 DN40 2200×1600×2100
BHJY-1×2-390/1.0-1
2.0 390 1.0 1.5 DN40 2200×1600×2200