Pulse Damper
Chemical pump,Dosing Pump,High pressure pump,Dosing Equipment > products > Washing Equipment > High Pressure Washing Equipment > Views

Pulse DamperPulse Damper

Pulse Damper Function
Pulse damper, also known as buffer, pulse buffer, air chamber, accumulators. It can remove water hammer pulse for protecting pipelines. It uses the compressibility of gas chamber, storage, and release the liquid, to reduce pipeline pressure and flow fluctuations purposes. Widely used in water treatment, environmental protection, power, chemicals, reverse osmosis, paper and other industries.
Pulse Damper Introduction In the reciprocating pump discharge stroke, the gas pulse damper is compressed, the fluid pulse buffer increased, and this part of the reciprocating pump discharge fluid into the pulse damper, reducing the flow peak, in the reciprocating pump suction Stroke, air expansion inside the pulse resistance, pulse damper fluid flow, add pipe flow, pipe flow valley added value, thus reducing the pipeline's flow pulsation.
Pulse Damper Parameter

Model Material Volume(L) Pressure(MPa) SizeD(mm) SizeH(mm) Connection
MC-M-P0.15/1.0 PVC 0.15 1.0 130 220 Rc1/2″
MC-M-P0.35/1.0 PVC 0.35 1.0 142 235 Rc1/2″
MC-M-P0.6/1.0 PVC 0.6 1.0 174 250 Rc3/4″
MC-M-P1.0/1.0 PVC 1.0 1.0 210 310 Rc1″
MC-M-P2.0/1.0 PVC 2.0 1.0 220 300 Rc11/4″
MC-M-P4.0/1.0 PVC 4.0 1.0 320 340 Rc2″
MC-M-S0.35/2.5 304/316 0.35 2.5 130 220 Rc3/4″
MC-M-S0.6/2.5 304/316 0.6 2.5 150 230 Rc3/4″
MC-M-S1.0/2.5 304/316 1.0 2.5 170 250 Rc3/4″
MC-M-S2.0/2.5 304/316 2.0 2.5 220 300 Rc1″
MC-M-S4.0/2.5 304/316 4.0 2.5 270 340 Rc2″
MC-M-S6.0/2.5 304/316 6.0 2.5 320 380 Rc2″
MC-M-S0.15/5.0 304/316 0.15 5.0 130 220 Rc1/2″
MC-M-S0.35/5.0 304/316 0.35 5.0 142 220 Rc3/4″
MC-M-S0.6/5.0 304/316 0.6 5.0 172 235 Rc3/4″
MC-M-S1.0/5.0 304/316 1.0 5.0 210 260 Rc3/4″
MC-M-S2.0/5.0 304/316 2.0 5.0 240 285 Rc1″
MC-M-S4.0/5.0 304/316 4.0 5.0 300 320 Rc2″
MC-M-S6.0/5.0 304/316 6.0 5.0 350 340 Rc2″
MC-M-S0.4/10 304/316 0.4 10 105 305 M27×2
MC-M-S0.63/10 304/316 0.63 10 360
MC-M-S1.0/10 304/316 1.0 10 470
MC-M-S1.6/10 304/316 1.6 10 170 400 M42×2
MC-M-S2.5/10 304/316 2.5 10 470
MC-M-S4.0/10 304/316 4.0 10 580
MC-M-S6.3/10 304/316 6.3 10 750
MC-M-S0.25/20 304/316 0.25 20 110 140 M18×1.5
MC-M-S0.4/20 304/316 0.4 20 130 160
MC-M-S0.63/20 304/316 0.63 20 150 160 M22×1.5
MC-M-S1.0/20 304/316 1.0 20 170 170
MC-M-S1.6/20 304/316 1.6 20 190 196 M27×2
MC-M-S2.5/20 304/316 2.5 20 210 208
Material Can Use: PTFE,PVC,PVDF,304,316,316L
Note:
1, Liquid Temperature: 304,316: -18℃-90℃, PVC: -18℃-60℃.
2, Two kinds of connection methods: Threaded & Flange
3, With Manometer & Without Manometer
4, Viscosity of liquid should under 1000mm2M/s.